Related Searches : IP CameraHD IP cameraOutdoor IP cameraIP Camera ModuleHome IP CameraWireless Network IP Camera

M511E/M511W IP CAMERA

Post Date : March 21
Product Details
Company Profile

Item specifics

Specifications

Pentium III CPU 500 MHz or higher,
or equivalent AMD 128MB RAM
Windows 98,ME,2000,XP,Vista
Internet Explorer 6 or later

The M511E/M511W Day/Night Pan/Tilt IP Camera provides full overview and true day/night capabilities to be the perfect solution for indoor applications that need to cover everything at anytime, but still be cost-effective.
Features
  • Maximum Resolution 640x480 (VGA) provides superior image quality
  • Simultaneous MPEG-4 and Motion JPEG video stream
  • Excellent Image Quality up to flexible 30 fps in all resolution for optimum bandwidth use
  • Wireless (IEEE 802.11b/g) Networks Connection (M511W)
  • Two-way Audio with Built-In Microphone
  • IR Working distance up to 10M
  • 354 pan range, 60/sec pan speed; 125 tilt range, 80/sec tilt speed
  • Optimal Synchronization of Audio and Video
  • Support Live Video Viewing on Microsoft Live Messenger
  • Mobile Phone Streaming Live Video through 3GPP / ISMA / RTSP
  • Mobile Phone Live Image through 2.5 WAP
  • Multi-level Password Protection for Restricting Camera Access
  • Built-In Multi-Window Motion Detection (3 detection areas)
  • Video Buffer makes the Streaming Smoother
  • UPnP for Fast and Easy Installation
  • DDNS Supported
  • Bundled 16 Channel Surveillance Software
  • User-friendly & Multi-lingual UI
Specifications
- ModelsZAVIO M511E/M511W
- WirelessIEEE 802.11b/g (M511W)
- Image Sensor1/4" Progressive CMOS Sensor
- LensF2.0, 4.0mm
- IR Working Distance10M
- Zoom10x Digital
- Minimum Illumination0 Lux with IR LEDs on
- Video CompressionMotion JPEG & MPEG-4
- Max Resolution640 x 480 (VGA)
- Frame RateMotion JPEG: Up to 30 fps in all resolutions
MPEG-4: Up to 30 fps in all resolutions
- Video Streaming

Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
3GPP/ISMA RTSP compatible

- Audio

Two-way (full duplex)
Built-in microphone
Audio compression: G7.111PCM, 8kHz, 64kbit/s

- Alarm and Event ManagementBuilt-in multi-window motion detection
Image upload over FTP, e-mail and HTTP
Notification over TCP and e-mail
- Connectors

Ethernet RJ45 for 10/100 Base-T
DC power jack
Terminal blocks for 1 alarm input, 1 output
Reset push switch
3.5mm jack for Mic/Line in, 3.5mm jack for line out

- Processors and MemoryARM9 based 32-bit RISC CPU
32MB RAM, 8MB Flash
- Operation SystemLinux 2.4
- Power12V DC, max 5 W
PoE Built-in IEEE 802.3af Class 0 (M511E)
- Operating Conditions0º - 50 ºC (32º - 122ºF)
Humidity 20 - 80% RH (non-condensing)
- Minimum System RequirementsPentium III CPU 500 MHz or higher,
or equivalent AMD 128MB RAM
Windows 98,ME,2000,XP,Vista
Internet Explorer 6 or later
- Supported ProtocolsBonjour, TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP, RTSP, RTP, HTTP, TCP, UDP, 3GPP/ISMA RTSP
- Video Surveillance SoftwareProfessional surveillance application for
viewing, recording and archiving up to 16
cameras
-ApprovalsCE,FCC,RoHS

- Dimensions

112 x 114(ø) mm

Company Related ProductsView the Seller's Products
SFP Transceivers

SFP Transceivers

SFP Transceivers

: Per Cisco Systems literature, the Cisco switches with SFP slots do not accept modules other than

155Mbps/622Mbps/1.25Gbps/2.5Gbps SFP Transceivers (small form factor pluggables)

NT-SFP-G05-D

Description
Meet SFP Multi-Source Agreement(MSA) and SFF-8472 with duplex LC receptacle
Metal enclosure for lower EMI
Transmitter Center Wavelength 850nm, 1310nm, 1550nm
Receiver PIN or APD Data Rate up to OC48
Soft TX_FAULT monitor
Soft RX_LOS monitor
Soft Tx_Disable control and monitor
With user writable EEPROM
Operating Temperature 0~+70
RoHS compliant

Applications
1) SONET/SDH
2) Fiber Channel
3) Ethernet

Note: Per Cisco Systems literature, the Cisco switches with SFP slots do not accept modules other than Cisco's own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non-Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.

Detail more >>
Fiber Optic Patch Cord

Fiber Optic Patch Cord

Fiber Optic Patch Cord

Superior quality standard PC/UPC/APC polishing
100% Optic test (Insertion Loss & Return Loss)

Fiber Optic Patch Cord

Features:

  • Superior quality standard PC/UPC/APC polishing
  • 100% Optic test (Insertion Loss & Return Loss)
  • 0.9mm, 2.0mm and 3.0mm cable optional
  • Comply to IEC Standard
Specifications

Optical performance

Measurement parameter

Singlemode

(1310 nm)

Multimode

(850/1300nm)

Optical

Insertion loss

UPC

APC

PC

≤0.2 dB

≤0.2 dB

≤0.4 dB

Return loss

≥50 dB

≥60 dB

≥35 dB

Mechanical

Changeability

0.2 dB

Durability

>1000 times

Interferometer

Apex offset

≤50um

Undercut

Comply to IEC and BELLCORE Standard

Operating temperature

-20 to +70

Storage temperature

- 40 to +80

Optical cable conductor diameter:

62.5/125, 50/

Detail more >>
You may also be interested in:Wired IP CameraInfrared IP CameraNetwork IP CameraIP Camera ServerOutdoor Wireless IP CameraIP Surveillance Camera
The informations displayed above are provided by the seller. The authenticity, accuracy and legality of the content are borne by the seller. Please realize that the risks in Internet transactions are objective.
Talk with SupplierX
Madam Sir or:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare