Related Searches : CR2000A common rail system tester simulatorcommon rail system tester simulatorcommon rail system test benchCommon Rail Test Benchcommon rail simulatorCommon Rail Test Stand

CR-2000 Common Rail system test simulator

  • Supplier - Taian Jinshi Injection Pump Services Center
  • China (Mainland)China (Mainland)
  • US$2.5 Million - US$5 Million
  • Manufacturer, Trading Company, Distributor/Wholesaler
  • North America,South America,Southeast Asia,Africa,Mid East,Eastern Asia
  •   
  • Mr.Brooker
  • 86-538-8203275
Post Date : April 06
Product Details
Company Profile

Item specifics

TAISHAN
QINGDAO
Auto Testing Machine
CR-2000
Shandong China (Mainland)
T/T,Western Union,MoneyGram
1 Set/Sets
200 Set/Sets per Month
Electronic

Specifications

CR-2000 Common Rail Pump and Injector Tester

 

Model 

CR-2000A Common Rail Tester Simulator 

Description 

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR-2000 common rail tester can used for testing following pumps: BOSCH CP1, CP2, CP3, DELPHI, SIEMENS, DENSO HP2 and HP3. I

t has the functions to test electromagnetic and piezoelectric injectors.

Features 

1. Modulated driving signal to ensure the safety of the solenoid of the CR pump

2. Adjustable duty cycle for the driving signal

3. Short circuit protection for the output circuitry of the solenoid driving signal

4. Measure and LEC display rail pressure

5. To test if the CR injector is still function. To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to continuous injection mode. The CR injector is in normal condition, if it is capable to inject fuel under the driving signals by the tester.

6. To test injector spray atomization. To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to high injection mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.

7. Checking the injectors return oil and injection oil.

Accessory 

1. 1 cable to link BOSCH pressure sensor 

2. 2 cables to link BOSCH pressure regulator

3. 1 pressure relief valve cable

4. 1 cable to link six BOSCH electromagnetic injectors

5. 4 DELPHI injector connectors

6. 6 DENSO injector connectors

7. 1 cable to link six SIEMENS piezoelectric injectors

 A.jpg

 

 

B.jpgC.jpgCR-2000 Cables.jpgcables.jpg

                              Welcome for details! 

Company Related ProductsView the Seller's Products
TSQ-1.6 type hard bearing dynamic balancing machine

TSQ-1.6 type hard bearing dynamic balancing machine

TSQ-1.6 type hard bearing dynamic balancing machine

1.Small size, large output, high sensitivity and reliable performance
2.System uses the HSC Computer Measurement System

             TAISHAN JINSHI FUEL INJECTION PUMP SERVICE CENTER

217.jpg

DESCRIPTION:

TS-1.6-type hard bearing balancing machine is designed and manufactured by the company with a balance of machine cycle. Widely used in micro motors, power tools, machinery, and other small high-speed rotating shaft balance calibration. Measurement system using HSC computer measurement systems, speed, value, phase full use of digital display. 6 rotor types can be optional, intuitive display, and can remember the show, unbalance directly to "g" shows. Electromechanical transducer using piezoelectric sensor, which features small size, large output, high sensitivity and reliable performance. Transmission with "O" ring belt, loading and unloading easy, stable transmission. So this machine is simple,? High efficiency, high precision.

 

Technical parameters:
1, workpiece quality and range ..................................... 1.6kg
2, workpiece diameter ..................................... 260mm
3, supporting the scope of ..................................... 3-40mm shaft diameter
4, two contractors from ....................................... 30-400mm
5, balancing speed ......................................... 500-1340mm
6, lap belt Department ............................... 17-85mm shaft diameter range
7, fixed rate ......................................... 0.12kw motor
8, at the smallest degree of residual imbalance ........................... ≤ 0.2g.mm/kg
9, unbalanced reduced rate ................................... ≥ 95%

Detail more >>
NT-I diesel engine fuel injection injector nozzle tester

NT-I diesel engine fuel injection injector nozzle tester

NT-I diesel engine fuel injection injector nozzle tester

NT-I NOZZLE INJECTOR TESTER

TS-1 glib tester

DESCRIPTION:

1.detection of diesel fuel injection pump ASSY

2.injector opening pressure

3.atomization quality

4.injection angle

 

MAIN TECHNICAL PARAMETERS:

1.model:      NT-1

2.pressure gauge diameter:   150mm

3.pressure gauge range: 0-60Mpa

4.pressure gauge accuracy calss:  1.5

5.maximum test pressure:  40Mpa

6.fuel tank capacity:  3.2L

7.outline dimension: 320mm×300mm×500mm(length/width/height

8.gross weight:20kg

Detail more >>
You may also be interested in:COMMON RAIL TESTcommon rail test equipmentcommon rail test machineCommon rail system testerCommon Rail Diagnosis Systemcommon rail systemCommon rail pump test benchcommon rail injector test benchCommon Rail Injection Test Bench
Talk with SupplierX
Zhao Brooker:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare