Related Searches : rechargeable electricRechargeable air pumpRechargeable Electric Sprayerrechargeable electric backpack sprayerrechargeable electric fanelectric rechargeable shaver

Rechargeable Electric pump

  • Guangdong China (Mainland)
  • Shenzhen
  • Pengke
  • PK-401
  • Tag:Electric pump,pumps
  • Supplier - Dongguan Pengke Electron Technology Co., Ltd.
  • China (Mainland)China (Mainland)
  • Below US$1 Million
  • Manufacturer
  • North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
  •   
  • Mr.Mark
  • 86-769-81872609
Post Date : March 24
MEMBRANE SWITCH KEYBOARDS
Membrane Switch Panels Manufacturer
Worldwide Free Shipping
Fast Turnaround in 24 Hours
High Quailty
Product Details
Company Profile

Item specifics

Guangdong China (Mainland)
Shenzhen
Pengke
PK-401
300 Piece/Pieces
3500 Pair/Pairs per Week
L/C,T/T

Specifications

Rechargeable Electric pump. No cables! It's portable,fast and simple,very practical for childrens games and many other things

Rechargeable Electric pump

Warning:
Read the instructions before using your pump.
Never use the pump while charging the battery.
Do not alter the pump or insert batteries.
Charge the pump in a well-ventilated area.
When the pump is plugged in to the power supply, keep it out of the reach of children.
If the cable, the power connector socket and/or the charger malfunction, you should dispose of the entire unit.
Never over-inflate inflatable products.
A bursting product can cause serious injuries.
Never leave your pump unattended while in use.
Do not block the air discharge during use.
Doing so could damage the motor.
Never use the pump as a vacuum cleaner, or for other functions than those the specified.
Do not wet the pump.
The pump does not work for used valves in bicycle tires, basketball balls, football balls, etc.
Charge indoors. Only use standard 230 V ~ current or a 12 V D/C car battery.
Only use the batteries and chargers that come with the product.
The warranty does not cover damages caused by batteries and chargers that did not come with the product.

Battery recommendations:
This pump includes a rechargeable battery that cannot be replaced.

This symbol means that this device must be disposed of properly.

At the end of its useful life, the pump and its charger must be disposed of properly.
Do not dispose of the pump in unclassified city waste. Separation of waste allows the recyclable materials found in this product to be reused, recycled and otherwise utilized.
Dispose of the unit in a waste treatment facility especially intended for this purpose. For more information, contact your local authorities.
Never dispose of this product in nature and do not incinerate. Electrical equipment and consumer electronics contain dangerous substances, which may be harmful to the environment and have negative consequences for human health.

Before using the pump:
You must charge the pump.
Plug the 230 V ~ transformer cable (provided with the pump) into a suitable power outlet and plug the other end into the connector socket on the pump.
Allow the pump to charge for 10 hours before its first use. (First charge)
For all successive charges, the charge time will be 8 hours.
After using the pump, charge it for 8 hours.
Store the pump fully charged.
To ensure optimal battery life, charge the pump every 3-5 months, even if you have not used it.
Allow the pump cool down for 20 minutes after 10 minutes of uninterrupted use. Failure to do so may result in damage to the product and its components.

Operation:

Remove the cover on the backside of the pump. Inside, you will find the hose and 3 nozzles with different diameters depending on the type of inflation valve.

Charging the battery of your pump
Charging the pump using the 230 V ~ power supply
Remove the cap covering the power supply connector socket (D).
Plug the 230 V ~ transformer cable (provided with the pump) into a suitable power outlet and plug the other end into the connector socket on the pump (D).
Wait at least 8 hours until the battery is fully charged.
Charging the pump using a 12 V D/C car battery.
Connect the proper connector to the car’s charger.
Remove the cap covering the power supply connector socket and connect the car’s charger cable.
Wait 8 hours until your pump is fully charged.
The vehicle’s engine must be running to charge the pump battery. Always do so with adult
supervision.

Using the light
To turn on the light, press the switch (F) immediately above it. To turn it off, press the same switch.

Caution:
Do not use the pump for more than 10 minutes without stopping. After 10 minutes, let it cool down for 20 minutes.
Do not over-inflate inflatable devices. They may burst or explode.

Company Related ProductsView the Seller's Products
AC Electric air Pump

AC Electric air Pump

AC Electric air Pump

AC Electric air Pump (UL certificate)
1. quick Inflate and Deflate with fitting and air bed,
2. Input: AC100V-120V,60Hz

AC Electric air pump (UL certificate)

PK-402 AC Electric Pump Includes 3 different nozzles to accommodate most valves. Simply plug into wall outlet indoors and start up. Suitable for inflation on air mattress. It takes about 1 mins. to inflate a queen bed firmly.
Function:
1. Installed with our patented motor cooling system, this new-design pump controls motor temperature by using the high-speed air stream so as to maintain motor under working temperature for long-time usage. As well, we match it with high-speed motor of the most advanced to keep it safer.
2. Removable handle
Removable handle.jpg

3. very quickly and stronger inflator/deflator, 25% Less inflate time.

Detail more >>
Single-nozzle Electric Ball pump

Single-nozzle Electric Ball pump

Single-nozzle Electric Ball pump

* One port balloon pump
* Built-in sound absorption and hot insulation material
* Nozzle Protective sleeve
* CE&RoHs

* One port balloon pump
* Built-in sound absorption and hot insulation material
* Nozzle Protective sleeve
* CE&RoHs

* INflate balloons quickly under high pressure, only 2SEC

* With patented special cooling system for motor, support conginuous use for long time.

* With special-design nozzle,inflate at a press and stop while relieving

PK-301 Single-nozzle Electric Balloon Pump as the extending product of our main product line - air pumps, comes out under our high quality policy with its long-time operation capacity and high-volume air output. Light-weight as 1.31kg, it can be conveniently taken along with for birthday, wedding or any other celebration occasions to fly the colorful balloons.

Installed with our patented motor cooling system, this new-design balloon pump controls motor temperature by using the high-speed air stream so as to maintain motor under working temperature for long-time usage. As well, we match it with high-speed motor of the most advanced to keep it safer.

Its special nozzle makes operation much easier. It start when you press down the nozzle and stop immediately when releasing. If large number of balloons need inflating, you may turn on the button for continuous use.

Specification: Input: AC100V-240V, 50Hz~60Hz

Max pressure: 18,950~19,298Pa

Max airflow: 800L/min

Detail more >>
You may also be interested in:rechargeable electric candle lightRechargeable Electric toothbrushElectric and rechargeable wine openerelectric rechargeable torchRechargeable Electric Bikerechargeable electric cigarette
The informations displayed above are provided by the seller. The authenticity, accuracy and legality of the content are borne by the seller. Please realize that the risks in Internet transactions are objective.
Talk with SupplierX
Shi Mark:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare