1.Angular contact ball bearing is Wide range of uses
2.Long Life Cycle
Angular contact ball bearing is Wide range of uses it,Quality and cheap ,We are in the form of packaging available: industrial packing,Delivery speed ,We normally ship date is: within 7working days after receipt of deposit money.
Angular contact ball bearings can also bear radial load and axial load. Be able to work at a high speed. Contact angle the greater the higher the axial load capacity. High-precision and high-speed bearings usually take 15-degree contact angle. In the role of the axial force, the contact angle will increase. Single row angular contact ball bearings can withstand axial load in one direction, in the radial load, will cause additional axial force. And can only be restricted shell axis or the axial displacement in one direction. If pairs of double-installed, so that a pair of bearing outer ring relative, that is, the face of wide-side wide face, narrow end of a narrow face to face. This can avoid additional axial force, but also in both directions so that shaft or housing to limit axial clearance range.
Angular contact ball bearing raceway for its inside and outside the circle on the horizontal axis can be a relative displacement, so it can also bear radial load and axial load - the joint load (single row angular contact ball bearings can only bear axial load in one direction, Therefore, often used in pairs are generally installed). Cage materials are brass, synthetic resins, etc., depending on bearing form, the distinction between the conditions of use.
Angular contact ball bearings are: 7000C-type (α = 15 °), 7000AC-type (α = 25 °) and 7000B (α = 40 °) of several types. The kinds of bearings locking the outer ring on the inside and outside the ring can not be separated in general, can withstand radial and axial load as well as the co-axial load in one direction. Bear axial load capacity of the decision by the contact angle, contact angle large, then the ability to withstand high axial loads. The kinds of bearings can limit the axis or shell of the axial displacement in one direction.