Related Searches : roll feederNC servo roll feederNC Roll FeederHigh Speed Roll FeederNC straightening roll feederCircle Feeder

Roll Feeder

  • 1 Unit/Units
  • ShenZhen
  • King Jime
  • RF-105NS
  • Guangdong China (Mainland)
  • Tag: roll feeder,pull feeder, push feeder
Post Date : August 10
Product Details
Company Profile

Item specifics

King Jime
Guangdong China (Mainland)
2000 Unit/Units per Month


Roll Feeder
Feeder Length:50mm
Material Thickness:0-1.6mm
Material Line Height:55-100mm


1) Models: RFS-105NS, 205NS, 305NS ... 7030NS

2) Coil width: 100, 200, 300, 400, 500, 600 and 700mm

3) Feed length: 50, 80, 100, 150, 200 and 300mm

4) Coil thickness: 0 - 1.6 / 0 - 3.5


1) High speed SPM 600

2) Easily adjustable for different thickness and width

3) Practical and economical with simple mechanism

4) Easy maintained with less troubleFeed accuracy: Depends on feed length of stock and stroke of press, the general accuracy is within ±0.05mm, and can be better up to ±0.01mm by pilot pin with automatic stop system.

Single type:

1) For cutting stock at certain length or coiling back the finished products

2) Double type: for there is any stuff left after stamping and for short or thin
stockMechanical features:

1) One way clutch: a) Made of tungsten carbide steel on the contacting surface to keep rigidity, precision, and durability b) The gear has high precision transmission after HRC 60 degrees heat treatment and precisely grinding

2) Roller: a) High feed accuracy at exact positioning with hollow roller of less eight,
and lower inertia b) Hard chrome plated heat treated to HRC60 degree and ground for the best rigidity and durability

3) The anti-reversing device: a) The structure is same the one way clutch, It can precisely control the lower roller which will not reverse even for long time used as it is high
in stability and precision b) The brake will not out of control by the splashed waste oil when it is punching such cause the lower roller to reverse, and transfer distance imprecision c) It will not cause high heat d) Super hard alloy and rolling post have been used. they are not easy to wear out e) The acting form of the rolling post is by circular movement, not like the
four guided posts in straight line moving, so it will not stuck f) As less friction it will accrued, so the torsion it need will correspondingly
reduced. The transfer structure will not easy wear out g) Speed can be reach to 30M/ min if the reversing device is fitted. In general, it is 20M/min. Efficiency has been increase about 50% h) Customers are welcomed to place orders for special specificationsOuter packing: Wooden cases

Company Related ProductsView the Seller's Products
NC Servo Roll Feeder,servo feeder, strengthener. press feed

NC Servo Roll Feeder,servo feeder, strengthener. press feed

NC Servo Roll Feeder,servo feeder, strengthener. press feed

Feeding machines can feed the coil steel strip to the press or cutter after straightening

1) Models: NCF-80, 100, 200, 300, 400 - 1600
2) Max. material width: 80, 100, 200 - 1,600mm
3) Material thickness: 0.2 - 3.2mm/4.5mm
4) Feeding speed: 100m/min
5) Feed levels: 70 - 170 / 90 - 190mm
7) Feed length: 9999.99mm
8) Feed accuracy: +/-0.03

Feeding features by PLC program from Mitsubishi:
1) NC Servo feeding. Operating with Computerize Numerical Control by PLC
program from Mitsubishi made in Japan. The electrical parts from YASKAWA
made in Japan including Servo motor, driver, encoder and interface screen
2) High precision feeding: to meet the coming of hi-tech industry, controlled
by computer closed circuit feedback system to keep precision degree within
3) Feeding function: input 20 sets of different feeding length, each group
provides 999 times for punching or cutting to satisfy processing of special
3) High efficiency release device, match with adjustment of signal from the
cutter or press machine through cable wire
4) Setting of feeding length: directly input feeding length on the control plate,
and then it can reach needed distance, feed length max. 9999.99mm,
speed max. 100m/min

Detail more >>
Straightening Machine (Heavy Sheet)

Straightening Machine (Heavy Sheet)

Straightening Machine (Heavy Sheet)

1) Straightening machine can straighten or flatten coil steel strip for press, cutting and forming
2) Coil thicknes

1) Model: HS-150, 200, 300, 400, 500-1,000
2) Max. material width: 150, 200, 300, 400-1,000mm
3) Material thickness: 1.0 - 6.0mm
4) Speed: 15m/mim
5) Motor: 3 - 15HP
6) Machine dimensions (L x W x H): max. 2.1 x 1.5 x 1.6m

1) Suitable for straightening different thickness and weight metal sheets
2) Equipped with magnetic contactor and electronic components, minimum
3) Efficient automatic material feeding equipment, a dramatic increase in
productivity is achieved by land up with auto reel (MT-type), double head
coil cradle (MTD-type) (MTDM-type)
4) Feed and straightened rolls with hard chrome finished
5) Equipped with inverter control and induction system
6) Threading table device
7) Power hold down arm device
8) Customers are welcome to place orders for special specification

Outer packing:
Wooden cases

Detail more >>
You may also be interested in:Disk FeederMicro Feedersausage feederwater feederhopper feedermagnetic Feeder
The informations displayed above are provided by the seller. The authenticity, accuracy and legality of the content are borne by the seller. Please realize that the risks in Internet transactions are objective.
Talk with SupplierX
Liu Eileen:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare