Related Searches : InjectorCAT INJECTORCummins InjectorDetroit InjectorGas InjectorInjector Sleeve

[KITA]Auto Injector

  • Daehwa
  • DHP-M2000
  • Gyeonggi-do South Korea
  • L/C,T/T
  • Tag:-e.g epoxy polyurethane injection grouting pump
Post Date : October 12
Product Details
Company Profile
Inquiry Records(1)

Item specifics

Daehwa
DHP-M2000
Gyeonggi-do South Korea
L/C,T/T

Specifications

Injection grouting system

DHP-M2000 automatic injector is a single type high pressure injector designed to
Apply urethane resin and epoxy injection material to the crack part. As this
electronic injector is easy to handle, easy to change consumables, and compact,
while providing high discharging pressure, it is widely used in concrete repairing
and reinforcing works.

Usage

1.Urethane resin injection
2.Epoxy injection
3.Injection into steel plate, loose part and crack areas

Specifications

1.Power supply : 220V 1p
2.Max. pressure : 350kgf/ or higher
3.Discharge : Pump unit 8ø 0.4/min
Discharge : Pump unit 12ø 0.8/min
4.Weight : 14Kg

Company Related ProductsView the Seller's Products
[KITA]Reinjector

[KITA]Reinjector

[KITA]Reinjector

injection grouting system

The reinjector employs a high-pressure injection sysytem to make sure sufficient injection
regardless of crack size. The powerful internal spring, in addition, allows for seamless repair
work by putting the remaining material(25cc)to an effective use in the secondary(low-pressu
re) injection following the first high-pressure injection.
As the reinjector is designed to perform the high-pressure injection and then fisish the
repair work with a secondary low-pressure injection, users can be relieved of the burden
of drawing back the injector each time for recharge. (The reinjector is equipped with a
vented backflow preventer at the center of the cylinder rubber packing.)
Detail more >>
[KITA]syringe injector capsule

[KITA]syringe injector capsule

[KITA]syringe injector capsule

injection grouting system

A syringe injector is a low-pressure injector used in repairing cracks in concrete
structures. Low-pressure injection method improves the work efficiency by
injecting epoxy resin deep into the wide areas of fine cracks all at the same
time. It also has graduations on its surface so that you can confirm the injection
amount with the unaided eye.
Detail more >>
You may also be interested in:Auto Injectorinjector testerflavor injectorveterinary injectorpencil injectorStandard Injector
The informations displayed above are provided by the seller. The authenticity, accuracy and legality of the content are borne by the seller. Please realize that the risks in Internet transactions are objective.
Talk with SupplierX
Cha Jae In :
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare