Related Searches : Indexing ChucksManual ChucksManual Cam Operated Coventry Concentric ChucksIndexChucksOXYGEN INDEX

Manual indexing Chucks

  • 10 Box/Boxes
  • Delhi India
  • Mumbai - INDIA
  • 5162
  • 2
  • Tag:Manual indexing Chuck,Lathe Chucks, Indexing Chucks
  • Supplier - MUKESH TRADING CO.
  • India			India
  • Manufacturer  
  • North America,South America,Eastern Europe,Southeast Asia,Oceania,Mid East,Eastern Asia,Western Europe
  • Mr.Chander
  • 91-11-25183549
Post Date : December 31
Product Details
Company Profile
Inquiry Records(1)

Item specifics

Delhi India
Mumbai - INDIA
50 Box/Boxes per Week


Offer : Lathe Chucks : Power Chucks, Manual Chucks, 3 Jaws Chuck, 4 Jaws Chucks, 6 Jaws Chucks, Cylinders & Many More Chucks.

These manual indexing chucks with power clamping are suitable for machining jobs at 90°, 120°, 180° or any other angle in one clamping. Once the job is clamped, the operator only has to pull and push a lever to index for the next operation. The job need not be de-clamped for indexing. The jaw pads are designed to suit the shape of the component.

These chucks are ideal for machining automobile transmission cross, hydraulic fittings and valve bodies.

Model ICM 140ICM 160CM 180ICM 220ICM 250ICM 300ICM 350ICM 400
Chuck diaA140160180220250300350400
Registered dia. H7B686880130145160200200
Registered depthC55677789
Height of the chuckD147170197225257317398473
Height of the chuck bodyE778595105113135165190
Pitch circle dia.F110125140170200230270325
Chuck holding-No x dia.G2 X M124 X M124 X M124 X M164 X M204 X M244 X M304 X M30
Thread lenghtH1818182530354550
Movement of each jawJ1012141517202334
Chucking range-MinK58597296112145182215
-Max 7883100126146185228284
Swing dia.L100120150180220280350430
Projection beyond

Company Related ProductsView the Seller's Products
Power Operated Collet Chuck

Power Operated Collet Chuck

Power Operated Collet Chuck

Offer : Lathe Chucks : Power Chucks, Manual Chucks, 3 Jaws Chuck, 4 Jaws Chucks, 6 Jaws Chucks, Cylinders etc.

Designed as a low cost alternative to Power Chucking Systems, these chucks are used for machining work pieces that cannot be chucked optionally in power operated jaw chucks.

They are ideal for machining parts that are susceptible to deformation or sureface damage or components that require high speed machining. They are equipped with a lubrication facility that ensures a long, trouble free life.

These chucks have a self-adjusting ability, which can automatically accommodate small variations in the diameter of the bar throughout its length. Since they operate within a defined axial travel in both directions, major change of stroke control is not required for changing from a lathe chuck to a collet chuck.

Since there is no end movement of the work piece while gripping, in these dead length collet chucks, the second operation work can be accurately located endwise. They can also be equipped with steel or rubber flex collets, on request.

Manufactured from high-grade alloy steel, all the sliding surface of these chucks are hardened and ground for accurate running and long service.

All collet chucks can be supplied with standard cylindrical recess mounting or with short taper mountings. Other spindle mountings are possible with the use of an adaptor plate

Detail more >>
Front Operated Self-Contained Power Chuck

Front Operated Self-Contained Power Chuck

Front Operated Self-Contained Power Chuck

Offer : Lathe Chucks : Power Chucks, Manual Chucks, 3 Jaws Chuck, 4 Jaws Chucks, 6 Jaws
Chucks, Cylinders & Many More Chucks.

These self-contained power chucks have been designed for machining of bar stocks, pipes and flanges.

The chucks are activated by a built - in cylinder, which eliminates drawbar/ drawtube, thus keeping the bore free.

The compressed air is fed into the chucks through the profile seals only when the chucks are in a stationary condition. The compressed air actuates the piston rod through the non-return safety valve. The movement of the jaws is controlled by the force acting on the piston that is transmitted to the base jaws by the chucking piston through the wedge systems. On completion of the chucking operation, the pressure is maintained by the non-return safety valves.

The salient features of the self-contained chucks are :-
  • Built-in cylinder
  • High gripping force
  • No need of draw bar/ draw tube
  • Easy for mounting
  • Chucking & unchucking with spindle top
  • Spindle bore is free for bar work
  • Double non-return safety valves

Detail more >>
You may also be interested in:Index plateIndex TableIndex Tabtelephone indexindex cardIndex Divider
The informations displayed above are provided by the seller. The authenticity, accuracy and legality of the content are borne by the seller. Please realize that the risks in Internet transactions are objective.
Talk with SupplierX
Puri Chander:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare