Related Searches : Rust InhibitorPenetrating LubricantRust LubricantSPRAY LUBRICANT AND PENETRATING OILAnti Rust Lubricantanti rust lubricant spray

Car Well CP90 Rust Inhibitor, Lubricant, Penetrant

Post Date : February 12
Product Details
Company Profile

Item specifics

Specifications

Stop and inhibit rust, aluminum oxide, greening on wiring, and corrosion from dissimilar metals! CarWell

Stop and inhibit rust, aluminum oxide, greening on wiring, and corrosion from dissimilar metals! CarWell Rust Inhibitor CP-90, aka T-32, is a unique blend of rust inhibitors to control corrosion on ALL metals. It eliminates moisture containing salt, dirt, and air pollutants from the surface of metal to give long lasting protection. It also lubricates moving parts and is an excellent penetrant, even through existing rust. CP-90 does not harm painted surfaces (including CARC paint), plastics, rubber, glass, or wiring.

Application of CP-90 will control corrosion and extend the use of your vehicle and equipment when applied on a regular maintenance program. It can be used on new, used, and even rusted areas or equipment parts (recommended: for rust removal). CP-90 can be applied to more areas than any other conventional rust protection like batteries, working mechanisms and moving parts (see list for typical application areas). CP90 is easy to apply, easy to clean-up and the vehicle or equipment can be returned to service immediately. Note: for aircraft/aerospace parts, large and/or flat surfaces (non-creep areas), we highly recommend

The CarWell product and product support have been used successfully for over ten years and currently are used by many military and commercial fleets including U.S. Army, U.S. Postal Service, FedEx, and UPS. CarWell has Department of Transportation Approval and is safe to use.

CP-90 reduces downtime, controls and prevents corrosion and provides lubrication on all moving parts.

OUTSTANDING BENEFITS AND FEATURES:
  • No VOCs
  • No CFCs
  • Non-Flammable
  • 100% Non-Conductive
  • No Teflon
  • No Solvents
  • No Silicone
Directions:

Apply CarWell CP-90to a vehicle/part and allow to cure for a minimum period of 48 hours. After 48 hours CP-90 has fully penetrated the metal and can be left on or washed off with a mild environmentally friendly cleaner/degreaser such as , , or .

Surface Repainting

To repaint an exterior surface after CP-90 has been applied, clean the surface with a preparation solvent as usual. Prime within 1 to 2 hours before CarWell is allowed to creep and return, then top-coat as per paint manufacturers directions and then re-apply the CarWell product in appropriate areas.

ANALYTICAL
ASTM B117 - salt fog (modified) 500 hoursASTM D4541 - Pull-off Adhesion - HATE
GM 9540P - cyclic corrosion test (modified) 80 CyclesASTM D522 - Mandrel Bend - Adhesion
ATC test track - pre exposure to live agentIR - per CARC specifications
Live agent testing (per CARC specs)Gloss - per CARC specifications
ASTM G53 - Fluorescent UV Condensation (QUV)ASTM D3363 - Pencil test (film hardness)
ASTM D3359A - Wet AdhesionDS2 - Resistance
ASTM D3359B - Dry Adhesion 
APPLICATION INSTRUCTIONS
Company Related ProductsView the Seller's Products
Car Well AR 500 Aircraft Corrosion Inhibitor

Car Well AR 500 Aircraft Corrosion Inhibitor

Car Well AR 500 Aircraft Corrosion Inhibitor

500 is a unique blend that reduces friction and controls corrosion on ALL metal surfaces. It eliminates

 500 is a unique blend that reduces friction and controls corrosion on ALL metal surfaces. It eliminates moisture containing salt, dirt and air pollutants from the surface of the metal to give long-lasting protection.

This proven corrosion inhibitor was developed specifically for the Navy and Air Force MIL-C-81309-E, Amendment 3. AR 500 is also approved by the AGSE Materials Branch for use on Army Aircraft.

AR 500 can be utilized on aviation parts and surfaces to inhibit/stop all types of corrosion, including aluminum oxide, rust, dissimilar metal, etc. AR 500 penetrates, lubricates moving parts, removes moisture, and creates a thin protective barrier.

OUTSTANDING BENEFITS AND FEATURES:
  • Non Hazardous in Neat Form
  • Non-Toxic
  • Non Ozone Depleting
  • No Phenols
  • No Nitrites
  • No Heavy Metals
  • No Active Sulfur
  • No Arsenic
  • No PCB, PC, TCDD or other dioxin related substances
APPLICATION:

AR 500 AVIATION PRODUCT SUGGESTED APPLICATIONS
(Military - AR 500 should be applied per Tech Order/Manual)

Single Engine & Light Twins
Spray Into: vertical and horizontal stabilizers, fuselage, wing section, locks, hinges, closure mechanisms, teleflex cables, air vent cables, trim cables, throttle cables, battery boxes, engine compartments, avionics, antenna mount.

Rotor Wing Aircraft
Spray Into: engine compartments, air vent cables, hinges, locks, tail boom section, closure mechanisms, grip areas, landing gear, strap-pack, rotorhead, avionics, cannon plugs.

Cargo Aircraft
Spray Into: micro switches, avionics, hinges, locks, landing gear compartments, wing sections, closure mechanisms, garbage chutes, galleys, lavatory areas, main spar sections, belly skin sections, vertical and horizontal stabilizers, cannon plugs, cargo door brackets.

Float Equipped Amphibious
Spray Into: fuselage, floats, wing sections, all stabilizers, bilge area, hinges, locks, exterior motors, cannon plugs, avionics, connectors, closure mechanisms, micro switches, antenna mounts.

Turbo Props/Business Jet
Spray Into: hinges, locks, closure mechanisms, micro switches, trim drum actuators, landing gear compartments, wheel hubs, thrust reverse mechanisms

Detail more >>
Aluminator Non-Fluoride Aluminum Oxide Remover and Aluminum Brightener

Aluminator Non-Fluoride Aluminum Oxide Remover and Aluminum Brightener

Aluminator Non-Fluoride Aluminum Oxide Remover and Aluminum Brightener

Aluminum is light, strong and when its clean, beautiful. It doesnt take long for exposed aluminum to lose

Aluminum is light, strong and when its clean, beautiful. It doesnt take long for exposed aluminum to lose its original finish and become dull and dingy. Until now keeping aluminum looking its best has been a labor-intensive chore, but with Aluminator aluminum brightener from Orison Marketing, the job just got a lot easier.

Aluminator cleans and brightens unfinished aluminum* without heavy buffing or polishing. Use it as part of your regular maintenance schedule to prevent the buildup of surface corrosion and keep aluminum parts looking new. Aluminator is a mild surface etching acid solution designed to reduce the need for tedious hand buffing. Spray on an even coat of Aluminator and when the part is clean, simply rinse with clear water to stop the etching process. Used alone, or as a pre-treatment for more detailed polishing, Aluminator is perfect for removing road film, diesel smoke, watermarks, brake dust, and oxidation from any unprotected aluminum surface. Also works great on tires / whitewalls!

OUTSTANDING BENEFITS AND FEATURES:
  • Works as Spray or Soak
  • Replaces Harsh / Hazardous Acids
  • Non-Fluoride
  • Water soluble
  • Mild acidic pH (3-4)
  • Non-Flammable
  • Biodegradable
Compatibility Table

Aluminator is a mild surface etching acid solution. Prolonged exposure (soaking) can increase the risk of damage to different parts/materials. The chart below shows the compatibility of different materials with Aluminator.

Excellent = no adverse effects expected

Good = Minor Effect, slight corrosion or discoloration can occur with prolonged exposure

Watch Closely = Moderate Effect, softening, loss of strength, swelling may occur. Not recommended for continuous use

EXCELLENTGOODWATCH CLOSELY
ABS PlasticAluminumAcetal
BronzeStainless SteelBrass
Carbon GraphiteSiliconeBuna N (Nitrile)
Ceramic Al203TitaniumCarbon Steel and Cast Iron
CPVC Copper
EPDM Polyurethane
Epoxy Tygonr
Hastelloy-Cr  
Natural Rubber  
Neoprene  
Nylon  
Polycarbonate  
Polypropylene  
PVC  
VitonR  

NOTE*

This product is a buffered "safe" acid based aluminum brightener, designed for clean, unfinished (bare) aluminum. Not all aluminums are the same. Many things are manufactured with different alloys and even coatings mixed into the aluminum which, in effect, can block Aluminator.

Aluminator is not a "cleaner", it is formulated for etching aluminum surfaces and removing oxidation, road film, scum, diesel smoke, and water marks. The quick penetration and etching action reduces the need to rub, buff or agitate the surface being brightened.

Detail more >>
You may also be interested in:De-rust Lubricating SprayAll Purpose Anti Rust Lubricantmulti anti rust Lubricant oilsodium cyclamate CP90/CP95/CP13/NF13lubricantWellnessScale InhibitorCorrosion Inhibitorethylene inhibitor
Talk with SupplierX
Madam Sir or:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare