good stability wireless control
universal wireless remote control
Car travel alarm instructions
1, hand-held remote control function description
1, special hand-held remote control, from A, B, C, D 4 key component;
2, press A key 2S count clear 0;
3, according to B button to open the signal output; or long press B key 2S open signal output;
4, according to C key to close the signal output; or long press C key 2S close signal output;
5, press D key 2S adjust the count pulses;
6, while holding down the A button and D keys 2S sensor transmitter and sensor receivers on the code;
Second, sensor transmitter function description
1, each time before using the hand-held remote control, take the following steps to complete the first hand-held remote control and sensing transmitters operate on the code before you can use hand-held remote control, the process is as follows:
(1) Hold down the A hand-held remote control keys;
(2) to the sensor transmitter power;
(3) continue to hold the hand-held remote control D key until the buzzer transmitter long ring 2S, then release the button, then you can use the remote control on the transmitter set up;
(4) If the power outage on the power again, are not allowed to reuse previous good hand-held remote control code set;
(5) the completion of the code, if not received within 30S hand-held remote control signal, then the need to operate in accordance with the steps 1-3 can be set again.
2, press the remote control key 2S A clear count 0, long buzzer sound twice, and send clear signals to the sensor receiver.
3, according to B button to open the signal output, buzzer sounds for;
4, according to C key to close the signal output, buzzer sound 2;
5, D keys to adjust according to the number of pulses counted by a remote control, the buzzer:
(1), sounds for that count to 5,000,000 pulse signal output alarm signals;
(2), ring sound that counts 2 to 10 million pulse signal output alarm signals;
(3), ring sound that counts 3 to 15 million pulse signal output alarm signals;
(4), ring sound that counts 4 to 20 million pulse signal output alarm signals;
6, a power-monitoring sensors to see if there are connected sensors, if sensor is connected to operate normally; If there is no longer connected sensors is a buzzer sound 5S, prompted the installer checks sensors.
7, sensor transmitter set in the received sensor output signal, send alarm signals to the sensor receiver; sensing receivers receive the alarm signal is output after 5 minutes of the alarm signal.
3, sensing Receiver Functional Description
1, sensor transmitter and receiver of the code sensing operation of the code process is as follows:
(1), first according to the emission sensors and hand-held remote control on the code to let the emission sensors and hand-held remote control operation of the code;
(2), sensing the receiver power;
(3), press and hold the sensor on the receiver code key 2S release the button, then the receiver sensor ring a buzzer sound, said sensor sensing the receiver into the transmitter with the state of the code;
(3), while holding down the hand-held remote control key A key and D 2S, the sensors send to the code signal transmitter to the sensor receiver, sensor receivers at this time of receipt of the code sensor transmitter signal , sensor receiver 2 buzzer sound, said the completion of the code, and automatically exit to the code state;
(4), the operation code to be completed in the 30S, otherwise code will not succeed;
(5), hold down the receiver of the code button 6S, clear the code before all of the good;
(6), 1-3 can be repeated with the other transmitters on the code, up to 16 transmitters with on the code.
2, sensing the receiver receives the alarm signal transmitter sensor, the sensor output of the receiver 5 minutes of the alarm signal, (+12 V, 200MA;)
3, sensing the receiver receives the alarm signal, if not eliminate, the need for each power output of 5-minute alarm signal;
4, sensing the receiver receives the sensing signal transmitter clearance, clear alarm, then power will not be the police.
Note: Long ring: 0.5S On-0.5S Off, ring: 0.2S On-0.2S Off