Related Searches : Centrifugal CompressorCompressor CoolerCentrifugal Air Compressorcentrifugal air coolerair compressor coolerAir Cooler for Piston Compressor

Interstage Cooler of Centrifugal Compressor

  • shuangliang
  • CE, UL
  • Interstage Cooler of Centrifugal ...
  • Tube Heat Exchanger
  • Interstage Cooler of Centrifugal Compressor
  • Supplier - Shuangliang Eco-Energy Systems Co., Ltd.
  • China (Mainland)China (Mainland)
  • US$50 Million - US$100 Million
  • Manufacturer
  • North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
  • Mr.
  • 86-510-86630815
Post Date : April 17
Product Details
Company Profile

Item specifics

shuangliang
CE, UL
Interstage Cooler of Centrifugal ...
Tube Heat Exchanger
Jiangsu China (Mainland)

Specifications

Interstage Cooler of Centrifugal Compressor

Application

The cooler applies in fields such as electricity, air separation, chemical industry, pharmacy, etc. where multi stages compressors are widely applied for cooling down air, optimizing efficiency and guaranteeing the pressure. The interstage cooler has image of the lung of the compressor which directly influenca performance and efficiency of the compressor.

 

The structure of the interstage cooler
Divide according to tHe flow direction of the medium into B2 0r, B3 type, and to wet or dry to divide into MAC and BAC type medium it is among grade, from sHell, bundle, front and rear water chamber, built-in demister The shell is passed by (l.e.fin side) the high temperature air, the cooling water goes inside the tube, install the separator additional on the outlet of
the cooler Condensate after separator is gathered at the bottom and discharged through discharge outlet Bundie contains fintu be,tubesheet,side wall,adjustable pulley,is core of structural design Key comrnponents of heat transfer tube: E-fin fintube, plate fin etc.Can take bundle out for easy replacement.

 

The key component-heat transfer tuhe
1.The independently developed plate fin: expand the tube with plate fin to form the bundle, while there are symmetncal tubulator in between the tubes and fins,can strengthen the turbulance ntensity of flowing tough gas, it is better to enable and change effiaency.
2.E Fin tube: compressed rube with overcoat alum inurn pipe

 

 

Material
Based on different environment for uses, the materia is as follows

Shell material: Carbon steeI,Stainless steel;
Tubesheet material:arbon steeI,Stainless steel, duplex stainless steel, cladding tubesheet,SS cladding tubesheet, copper alloy tubesheet, titanium cladding tubesheet;overwelding tubesheet, copper alloy overwelding tubesheet.

Fintube material:dual phase steel/Aluminum, stainless steel / Aluminum, carbon steel / Aluminum, copper alloy / Aluminum, titanium material / Aluminum.
Water chamber material:Carbon  steel, lining with dual phase steel, lining
with copper, lining with titanium, lining with rubber.

 

 

Company Related ProductsView the Seller's Products
Surface Cooler

Surface Cooler

Surface Cooler

Surface Coller

Application

Install on the outlet of the cooler by combing lowtemperature water which is produced by waste heat recovery Lithium Bromide chiller to decrease hot air temperature. It is the typical energy-conserving products of environmental protection.

 

The device Structure and working prinaple
By air inlet, air outlet, bundle, demister. The air goes around the shell side (fin side), Low-temperature water goes inside the tube, the humid air is passed the bundle evenly through the direction plate, then through the diminisher, and the filter finally, make condensate and air separated, discharge through the bottom of air outlet. In the exit of the separator of the filter, the water droplet is smaller than 20 Um, 98% of the condensate can be removed. Bundle can be taken
out.

 

The key component-heat transfer tube
The independently developed plate fin: expand the tube with plate fin to form the bundle, while there are symmetrical tubulators in between the tubes and fins,can strengthen the turbulance intensity of flowing through gas, it is better to enable and change efficiency.


Material
Shell material: Stainless steel;
Tubesheet Material: Stainless steel, the stainless steel cladding tubesHeet;
Fintube materials: Stainless steel / Aluminum.
Water chamber material: Stainless steel, carbon

Detail more >>
Air pre-heater

Air pre-heater

Air pre-heater

Air pre-heater

Application

Air pre-heater: Extensively suhable for the fermem,food, chemical industry, print and dye industry, it has advantages  th at energy-conservation is effectual  high in effiaency.

 

The structure of the air pre-heater
By front and rear water chamber, elliptical fin tube and side wall. The air goes around the shell side (fin side),the steam goes inside the tube, because fin side of this kind of air pre-heater runs under 2 mediums containing dry and wet, so choose a surface of Aluminum fin to add water-favorable membrane.


Material

Based on different environment for uses, there are the
materials:
Shell material: Stainless steel, carbon steel;
Tubesheet material: Stainless steel, the steel of carbon, the stainless steel cladding tubesheet, copper alloy cladding tubesheet;
Tube material: Stainless steel / Aluminum, carbon steel / Aluminum, copper alloy / Aluminum;
Water chamber material: Stainless steel, carbon steel.

Detail more >>
You may also be interested in:Compressor Display Coolerair compressor oil coolerCompressor Wine CoolersAtlas Copco Centrifugal Air CompressorINGERSOLL-RAND Centrifugal Air CompressorShenTop Gung Ho Compressor Wine Cooler
Talk with SupplierX
Hi:
Can I help you?
Contact Supplier

Selected(1/4)Contact or Compare